Clore PL2320 20/10/2 Amp Pro-Logix Battery Charger

After much reviewing of blogs,reached the decision,I could spend more, but wouldnt get more very happy with product have brought a battery back to servicable status with this that my brand X couldnt.

Well made well thought out spend the extra money in this class you wont regret it.

This is good if you need a 20a charger to recharge a battery fast and the ability to charge a small battery at 2a. However it's not good for keeping a battery at float charge. It has a feature to excercise (partially discharge) the battery at regular intervals. These intervals are too often and not deep enough (deep cycle Batt. needs a minimum of 10% discharge before regharge)I would recommend removing charger after charge and replacing once a mo. It would also have been nice if the display showed voltage and charge state at the same time. I wish I had just stayed with Schumacher chargers.

Buy Clore PL2320 20/10/2 Amp Pro-Logix Battery Charger Now

I research battery chargers extensively needing a real good one to maintain my 2 AGM house batteries on my RV during times I do not use it or if I run down the batteries too much for the RV built in charger/inverter to do the recharge job well. This was the best excluding the one that was similar that costs 3 times the price. Good quality longer lasting, higher amperage (200 and up) AGM batteries are so expensive (a pair of 6 volt ones hooked in series easily cost $500) that using a cheaper charger on them that is not temperature compensated is false economy.

Read Best Reviews of Clore PL2320 20/10/2 Amp Pro-Logix Battery Charger Here

I've had the chance to use the Solar PL2320 battery charger 4 times now, comparing it against my old standby Century 87105 2/10/55 amp battery charger. I like to Solar for the fact that it displays % of charge and charging voltage when charging and when not charging it shows the % of charge of and battery voltage. The charger is also nice in that there are 3 charging protocols: one for conventional flooded lead-acid batteries, one for Absorbed Glass Matt (AGM) and one for Gel-type batteries. I frankly don't know what the differences are but I did notice that the % of charge noted for the battery I had it hooked up to changed when I cycled through the battery types on the charger. The overall charger is solid with cord wraps for both the charging cables and the power cables. Both sets of cables are approximately 5 feet in length. The charging process varies in time not only based on state of charge but also based on the charger's 'multi-phase' charging protocol. The charger doesn't simply apply a charge to the battery and shut off at 100%, it actually goes through a multi-step process that includes applying a load onto the battery reducing the state of charge slightly and then charges again. As I understand it, this helps with reducing sulfation. The charger is fan cooled and the fan, when running, is noticeable but isn't loud (maybe as loud as a computer fan). Overall a very good charger and in my opinion worth the money based on build quality, charge protocol sophistication and battery information provided.

Want Clore PL2320 20/10/2 Amp Pro-Logix Battery Charger Discount?