CTEK 56-261 Comfort Connect 3/8" Eyelet

Product description states nearly 36 inches. It is only 12 inches like the one that comes with chargers. If you need a longer wire like I do so I do not have to open the hood each time, this wire does not meet the bill as described

I purchased the CTek Multi U.S. 3300 Battery Charger for use on my three automobiles and riding lawn mower. I have the Ctek 56-261 Comfort Connect 3/8" Eyelet cable on my SUV and mower batteries. It is comforting to know that I can leave my mower charging all night or longer without removing the battery from the mower and it is perfectly safe. I am ordering two more cables to put in my wife's SUV and daughter's pick-up. If they need to charge their battery while I am away all they need to do is snap the connector to the charger's cable, plug in the charger then set the mode on the charger to Automobile. No worry about reverse polarity, sparks from clamps, improper grounding or clamps coming off. The 3/8" eyelets fit on the battery post clamps on all my vehicles. No need of boring out the hole to fit the bolt on the clamps. Plus, if you are away from home and need a jump the connectors can be left in place while standard jumper cables are used. Another plus, more so for the charger is it is so small you can take it with you on a trip where as a standard charger takes up too much space. This is a great system and the tech support is top notch. The only negative is the cable is somewhat short but I am sure that is by design to keep it away from moving engine parts while the vehicle is in use.

Buy CTEK 56-261 Comfort Connect 3/8" Eyelet Now

Liked the other reviewer claimed, it was too short. I bought 2pcs for my motorcycles and had a hard time to route the connector from the battery compartment to the outside where is convenient to plug into the charger. The hole of the eyelet was actually too large however it could still be tighten to the battery. Other than that it is a perfect connector for my CTEK charger.

Read Best Reviews of CTEK 56-261 Comfort Connect 3/8" Eyelet Here

The CTEK 56-261 Comfort Connect 3/8" Eyelet was really an M8 (8mm) model. The eyelets had to be enlarged with a dremel tool to make it fit a 3/8" post. Don't try to drill out the eyelet or you'll probably destroy the connector. Grind it out instead. It seems to work fine once it fits the post. I only gave it two stars because I don't appreciate being mis-lead by the description.

Want CTEK 56-261 Comfort Connect 3/8" Eyelet Discount?

These are great accessories for the CTek chargers. I put them on my 4 wheeler and motorcycle and even truck to allow me to simply plug the charger into the plug without having to access the battery terminals to charge the batteries.