VCAN Blinc 210 Full Modular Helmet with Aviator Graphics (Flat Black, Medium)

This is a great helmet! Fit is on the money. Great graphics,looks very cool! The BT is amazing,paired quickly and can listen to music up to about 65 mph,road noise hinders after that. Good quality speakers,very clear and functional. I highly recomend this helmet for its looks and saftey features.

This helmet may look like a bargain, and it could be except for one problem: it doesn't work.

I'd experimented with different headphone/helmet speaker systems and this VCAN looked a perfect solution. The graphics are cool and it's very reasonably priced, in particular for a helmet that comes with bluetooth already installed. However, as is often the case, you get what you pay for.

When I received the helmet, I started out by reading the directions which actually made it harder to figure out how to setup and use the bluetooth. Despite what the advertising says, the bluetooth battery does not come installed and you have to figure out first where the battery is located and second how to install it. The directions are no help: there's a picture that roughly looks like the bottom of the helmet with a arrow pointing vaguely to the back of the helmet and labeled "bluetooth discreteness." I am not making this up. Eventually I found that by peeling back the soft foam padding that lines the helmet, at the bottom back of the helmet, under the padding, was a small panel. Merely touching this panel causes it to fall off, as it's apparently held in place by the padding. The panel will be followed by the bluetooth unit, sans battery. The bluetooth unit is "keyed" (i.e., the exterior is constructed in such a way that there is only one way to install it) but not the battery. Like all lithium batteries, if you look at the bottom, there is spot on the bottom with several copper contacts that need to match up with whatever device you're trying to power. No where in the instructions or marked on the helmet is there any indication of which way to place the battery. Eventually I got a flashlight and propped the helmet up so that I could peel back the foam padding with one hand and clutch the flashlight with the other and peering into the minute slot, see where the interior contacts are. How hard would it have been to include a line that says "this way?" Apparently too hard for manufacturers of the VCAN helmet.

The directions say that you should plug the helmet into the charger and fully charge the battery before first use. After it's fully charged, the red charging light will turn green. Fair enough. I plugged the helmet in and let it charge overnight, some 14 hours. The red light never did change to green. In fact, while playing around with the bluetooth the next morning, I couldn't find a green light anywhere, just a red and a blue.

Despite that, I was able to sync up the bluetooth with my Blackberry and, at least standing in my living room, it sounded great. I say "standing in my living room" because I never was able to road test it. More about that later. If I'd wanted to, I could pump up the volume enough to make my head hurt and it was true stereo. This would be a great system in a helmet you could wear while actually riding a motorcycle.

I thought I was ready to road test it. The helmet is extremely cheaply constructed. The edges of all of the parts are rough from where they're vacuum molded and no one took the time to buff them out. Despite the plastic covering over the visor, once I removed it, I saw that it was scratched in several places, *on the inside*. That's just poor workmanship. Raising the face piece up and down requires some muscle and it's very rough in movement, jerking from one position to the other, as if there are internal pieces that have yet to have the rough edges worn off of them.

When I got the helmet, the chin bar was not latched in place, leaving the front of the helmet unsecured. To test the fit, I pressed the front piece into place, which locked securely. The helmet fit well, which was something of surprise, generally I end up playing with helmet sizes. For example, my Scorpion EXO-1000 full face runs a bit small and I wear an XXL, despite having a very average 7 3/8 hat size.

The final straw came when I had to raise the front of the helmet. I pressed in the latching button, which obediently clicked down and I was able to raise the chin bar. Then I tried to re-secure it while it was still on my head. I pressed the chin bar down and nothing happened. I tried again, a little stronger. Then a lot stronger. Finally I pulled the helmet off and tried to close from the outside nothing. The latching button, once depressed, would not pop back up and nothing I did could get the helmet to latch again. So, slightly more than 24 hours after receiving this helmet, it's already in a box on it's way back to Amazon.

The VCAN was a disappointment in nearly every way. So, if you absolutely have to have a modular helmet with a built-in intercom system, consider the Nolan Trilogy Outlaw Modular. I've seen these helmets at a few dealerships and they seem okay. At any rate, I was able to close and latch the chin bar and reopen it again without the use of power tools.

Personally, I'm giving up on helmets with speakers and going with the Kuryakyn Sound of Chrome handlebar speakers. Why not share the music with everyone on your block?!

Buy VCAN Blinc 210 Full Modular Helmet with Aviator Graphics (Flat Black, Medium) Now

This is an excellent helmet. Volume is not excessively loud. I can see where high speeds would impede on the sound (epecially for a phone call). I've used it paired with my phone for Spotify. I simply love it. If it had a little more volume or noise insulation, it would be a perfect 5 stars. It's still probably one of the best things since sliced bread ;)

Read Best Reviews of VCAN Blinc 210 Full Modular Helmet with Aviator Graphics (Flat Black, Medium) Here

I bought this helmet just over 30 days ago so now it is out of the return window. The vent plastic that holds the modular button in broke and fell out while riding. The Bluetooth speakers cut out while riding.

Want VCAN Blinc 210 Full Modular Helmet with Aviator Graphics (Flat Black, Medium) Discount?

The Helmet is really good for normal speeds usage, when in high speed sometimes the Bluetooth calls drop and the music is not that loud to be heard. Other than that the helmet is perfect and comfy and easy to use it's Bluetooth controller.

Wall / Car Charger Combo Pack for Samsung Focus

I received my charger recently and my experience is identical to the other reviewer's. When the phone is plugged in, touch doesn't work. Random applications open up, and it seemed as if my battery level discharged by a few percent after being plugged in for about 10 seconds (I used the diagnosic interface to notice the decrease--about 3%). It doesn't charge, the phone doesn't work, and it could even damage the phone in the long run.

Quite simply, do not buy this.

Guess you get what you pay for. $4 for 2 wall chargers and 2 car chargers seemed like a good deal. I received the products yesterday. I haven't tried the car charger, but the wall charger doesn't work as advertised. It may be charging my phone, but I'm unable to use it while it's being charged. My Samsung Focus started acting very strange when it was plugged in using this charger. I was unable to slide the locked screen up, so I unplugged it then unlocked the phone. I plugged it back it. At this point, the phone started switching between email accounts and apps on its own. I tried using both of the wall chargers and the same thing happened. The phone charging indicator looked like the phone was charging, but with this odd behavior I've become concerned it may damage the phone. I'm not using the wall chargers again. And I'm not sure if I'm going to bother trying the car charger after my experience with the wall charger.

Buy Wall / Car Charger Combo Pack for Samsung Focus Now

Works good as the original including the car charger and its little bit slow when compared to the home charger

Read Best Reviews of Wall / Car Charger Combo Pack for Samsung Focus Here

Received the product real quick. Great job, like it immensely and it comes in handy. Thank you.keep one with me and one in the car

Want Wall / Car Charger Combo Pack for Samsung Focus Discount?

Recieved in a timely manner and it's exactly what I needed for my new cell phone. Can't complain about the price either!

Save 44% Off

Griffin Itrip Auto Universal Plus Refresh FM transmitter and PowerJolt Auto Charging for Portable A

the clearest frequency to transmit on is 87.9. However this station is only available while the device is in international mode. Customer support will not tell you how to change the device into international BUT I WILL. Hold down the + and button for about 20 seconds. 'US" will flash in the upper left corner. Now press the + button until you see 'intl'. Now the device will unlock ALL frequencies 87.7 107.9. Use 87.9 or 87.7 for best reception. Also try changing from LX to DX (stereo to mono) because DX (mono) seems to give off a stronger signal without compromising sound. your welcome.

After reading other reviews, I was worried this wouldn't work well for us. But it does just fine.

Used it with Zune, iPod and iPhone without a hitch. Around town, a selected preset works the best and avoids re-tuning. On the road, click the button once when you encounter static or interference, and you are in the clear.

A hard wired connx would be better; this is a good second option.

Buy Griffin Itrip Auto Universal Plus Refresh FM transmitter and PowerJolt Auto Charging for Portable A Now

Got this item to charge and play music on my Droid. However, it appears to have some issues with charging the Droid. It will start charging the unit for a few seconds or even minutes and then stop (even if the Droid isn't anywhere close to fully charged). The FM radio component seems to work well though, so I'm using it, but it's annoying of course to plug in both a separate car charger and the iTrip. Griffin's tech support has been helpful and quickly got me a replacement unit to try, but it has the same issue. I would only recommend this with the Droid if you are aware that the charging aspect of the iTrip may not work with it.

Read Best Reviews of Griffin Itrip Auto Universal Plus Refresh FM transmitter and PowerJolt Auto Charging for Portable A Here

Finally a FM transmitter that is worth something....the sounds that came out were really clear, the range was good (my antenna is on the front of the car), and the smartscan worked great so that i could keep my eyes on the road for the most part....and the USB charger? great idea. i don't think you could do better for the price.

Want Griffin Itrip Auto Universal Plus Refresh FM transmitter and PowerJolt Auto Charging for Portable A Discount?

I've had a number of these fm transmitters. I had the first one Griffin released for the early iPods. I had a Transpod for the iPod Video. All worked very well. Easy plug and play. Never a problem.

I bought an iPod Touch and tried one of the docking units from Transpod. It didn't allow you to play video whilst plugged in. It also died after 24 hours so I returned it.

I bought one of these (much less expensive) Griffins as a replacement and it works great. I can set it up so my son can watch video whilst I'm driving. The sound quality is very good.

I've driven through cities with it and country and no problem. It's signal is powerful enough to drown out most local stations if I stray into an area where there's conflict. I've heard some newer models had to tone down the transmitter strength. This one doesn't seem toned down. I can use all of the stations without problem.

Design could earn it another star as the cables are a little long and having the transmitter in the middle is not the most convenient. But that's nit-picking. I can't see a real reason not to buy this. I see there's a white version around for less $$$ so that might be a better buy for the frugal.

Save 40% Off

Mono-crystalline Solar Panel - 12Volt / 5Watts

I purchased two of these panels about a year ago. They really crank out the power. I have them both wired together into a 12 volt battery system. These panels work flawlessly and are rugged. They will probably still be outside producing power 25 years from now with no worries. These are small 5 watt solar panels that produce power like bigger panels. The mono-crystalline panels are better than the poly-crystalline, since the small mono-crystal panels produce more power than the larger poly-crystal. Example: I have two 20 watt solar panels that are the same size. The "mono" panel produces far more power than the "poly" panel but they are both supposed to be 20 watt solar panels. Therefore I would rather have smaller panels that produce more power than larger panels that produce less. So it appears that the black solar panels produce more power than the pretty blue panels.

Sturdy aluminum frame like larger solar panels makes this one easy to mount. This is a sturdy well made panel that will last decades. Don't be fooled by cheap badly framed alternatives, been there, done that!

Buy Mono-crystalline Solar Panel - 12Volt / 5Watts Now

This robust panel, just 10-1/4 x 8-1/4 x 3/4 inches, easily runs a 12V 4.5A exhaust fan in my attic, with as much power as if it was coming from a freshly charged car battery. Direct red/red black/black wire connections, no controller required, but you could put one in plus a rechargeable battery if you wanted it to run for a while longer when the sun goes behind clouds.

It has 2 stainless screws at each corner of the frame, so I undid one of each of them (the one furthest away from the screen) and re-used it to attach the frame to a piece of aluminum angle (1 x 1 x 1/16, 8 inches long) on 2 sides, so that the panel is raised 1/4 inch off the surface to which it is attached, and this allows the (combined wire) cable to emerge unpinched. Then I screwed those angle brackets to the roof.

Just be careful with connections and installation. There are no instructions; the panel comes without a temporary screen cover and with the ends of its black and red connecting wires exposed. To avoid frying the unit, it is best to insulate the wire ends so that they do not touch each other, and to temporarily place a piece of ordinary letter-sized paper over the screen with painters masking tape holding it to the frame. This prevents the panel from trying to generate electricity during installation. If that happens, and the black and red exposed wire ends touch, you could damage the panel.

Read Best Reviews of Mono-crystalline Solar Panel - 12Volt / 5Watts Here

Came in the mail well packed in perfect condition.

Appears well made. I bought this panel to keep a pu

truck battery charged, however I have to wait for the

weather to warm up to begin.

Want Mono-crystalline Solar Panel - 12Volt / 5Watts Discount?

This panel showed 15 volts just out of the box. It recharged the battery on the trailer within hours. Looks well built and not as expensive as I would have thought.

12V 3.2AH Sealed Lead Acid (SLA) Battery for BP3-12 ES3-12 PS-1230 PW1203

Less than half the price of the original Toro replacement battery. Electric start turned after charging this for a few hours.

Bought two batteries to replace two OEM units that were supplied with our Bruno stair lift but failed after 6 months. These units appear ruggedly made and are performing well, but only time will tell if they hold up.

Buy 12V 3.2AH Sealed Lead Acid (SLA) Battery for BP3-12 ES3-12 PS-1230 PW1203 Now

Great replacement battery for my Toro recycler. The OEM battery that came with the mower lasted almost eight years. This looks like an identical battery, so I hope I get many years of service.

Read Best Reviews of 12V 3.2AH Sealed Lead Acid (SLA) Battery for BP3-12 ES3-12 PS-1230 PW1203 Here

Not much to say except if was exactly as described, charged

normally and works without any issues whatsoever. Arrived

quickly too. Good is good and I'm quite satisfied with this

replacement battery.

Want 12V 3.2AH Sealed Lead Acid (SLA) Battery for BP3-12 ES3-12 PS-1230 PW1203 Discount?

Works just like new thanks to you, If you need a battery for a toro self propelled you have come to the right place.

Save 19% Off

Garmin Astro 320 Rechargeable NiMH battery kit - 010-11343-00

• Charge 2 AA or AAA NiMH batteries
• Charger plugs into AC outlet
• International plugs for U.S., U.K., Australia and Europe
• Compatible with Approach, Astro, Colorado, Dakota, eTrex, GPS, Oregon and Rino series
• 2 AA NiMH batteries included

its a really good thing to have i love this product and you can charge them and re use them

Buy Garmin Astro 320 Rechargeable NiMH battery kit - 010-11343-00 Now

Took a long time to intially charge, but holds a charge well

Fully charged it lasted about two days

Read Best Reviews of Garmin Astro 320 Rechargeable NiMH battery kit - 010-11343-00 Here

This device does what it is supposed to do, i.e. charge two rechargeable AA batteries. That's the "pros". The "cons" are: 1) it takes about an hour to complete its work. 2) The batteries are difficult to remove from the charger. The instructions say don't use a sharp object to remove them but I have to use a small screw driver to extract them. 3) There is no cord. The device itself plugs directly into the wall outlet. That's not terrible, but having a cord would be nice.

Want Garmin Astro 320 Rechargeable NiMH battery kit - 010-11343-00 Discount?

This charger will save a lot of batteries. The charger works great and the customer service provided by Garmin has been amazing. (I lost one of the plugs and Garmin sent me a new part for FREE.) I still carry a set of alkaline batteries just in case the rechargeable ones die.

The supplied rechargeable batteries will not charge. They actually never charged, even out of the box. I am not sure if it is the charger or the batteries. But I messed with it long enough that now it is outside of the return window. I just couldn't believe something from Garmin, and Amazon, would not work out of the box and I thought I was doing something wrong.

Mr. LongArm 8936 3'-6' Extension Bug Squeegee with Pole

The handle on this is great. The sponge end is great. The weight is great. The squeegee is terrible. It is about 8" wide, but only about 4" get squeegeed in each pass. The problem is that it is simply too thick. I have used this to clean the windows on my car, and the first floor windows on my house. It is probably still the best one out there, but I am not very impressed with the squeegee part.

After reading a surprising number of reviews about squeegees not working, I stumbled onto this product with one review and decided to give it a shot. Guess what, it works just like a squeegee should. It's solid, the cheapest, and it happens to be made in America. Look no further.

Buy Mr. LongArm 8936 3'-6' Extension Bug Squeegee with Pole Now

Telescoping handle, so it reaches everything. It collapses down small enough to store easily in my RV storage compartment. Kudos and commendations; no complaints.

Read Best Reviews of Mr. LongArm 8936 3'-6' Extension Bug Squeegee with Pole Here

The version we received had a ridge in the squeegee side that left a streak on everything we tried to wash. The expander pole worked well as did the sopper side, but we had to return the product because it caused more work than it saved.

Want Mr. LongArm 8936 3'-6' Extension Bug Squeegee with Pole Discount?

It does leave some streaks, but overall I am happy with it. I did not have any problems with it coming apart. You do have to figure out the best angle for use.

Xantrex PROWatt 600 Inverter, Model# 806-1206

I've had this inverter for about two weeks and I really like it; and I'm doubly impressed for the price point. I've lived off grid for 15 years and needed a sine wave inverter to run some equipment that wouldn't run off my workhorse Trace modified sine wave. I haven't metered the output but it's running my touchy electronics continously without any problems, it's very quiet (I actually have it mounted on the wall in my bedroom) and it doesn't draw much power when it isn't being used. I like it so much that I'm considering replacing my primary inverter with the next larger Prowatt from this one. The built in voltmeter is a great extra as is the usb port for charging electronics. The battery connections on the back are large and easy access; the over current shutdown automatically resets itself when the batteries drop to an acceptable level (I accidently had it turned on while equalizing).

I purchased this inverter to replace a Sinergex Pure Sine 600 unit that failed after 5 years on my boat which is used to provide power to the entertainment system and TV.

Compared to other similar pure sine wave inverters the ProWatt SW600 is a great buy. Easily half the price of a replacement Sinergex and other similar units.

For my application, it had to be installed in concealed location. The SW600 was slightly larger than the Sinergex unit it was replacing but not by much and it fit nicely in the same space that the Sinergex unit was in.

The unit works great, provides clean power to the entertainment system and TV. It hums a bit when running but not enough to be annoying in a quiet cabin. If you are mounting this unit to a wood panel you may want to use rubber isolation to minimize the amplification of the hum through the wood panel.

My only complaint isn't so much with this unit as with the most recent 'safety' requirements that in order to comply with UL458 prevent this inverter (and virtually all other similar units) on the market today from turning on when DC power is applied. You MUST press a momentary button on the front of this unit to power it up. As a result of the safety requirements of UL458, it is now expected that any inverter will be mounted where it is easily accessible. Trouble is on my boat and in many other RV and other marine applications, the inverters are usually installed out of sight in a compartment.

Unlike most other inverters on the market in this category, at least Xantrex offers a remote panel/switch for this unit which was a big plus since I had to install it in a concealed location. However, it also meant running the remote cable and finding yet more space in a sensible and convenient location to mount the remote panel. The remote panel just has an indicator light and momentary power switch. For its size, at 2" x 2.5", it would be nice if the remote panel would at least include a display to show the power and voltage readings just like the main unit does.

My gripes about the remote panel issues aside, overall I would highly recommend this unit for any application in which you want clean AC power. It really is a great value.

Buy Xantrex PROWatt 600 Inverter, Model# 806-1206 Now

Update as of 7/29/12

There is unfortunelty more text in peoples comments, then in this review. Sorry about that.

However, I have TESTED this inverter for practical load applications.

I have tested it on my pellet stove, for 5 hours to run the computerized controlled Harmon stove.

I have just done a video on youtube where I used it to cook a full chicken in the crockpot for almost 5 hours.

(the crockpot doesn't need a fancy true sinewave inverter, but this checked to see it could manage a load efficiently)

Go to youtube, and type "themarkfellows2" to see me cook a chicken with it. The video is a little over long, but I also put a tutorial, with formulas in it. Hopefully, you find this useful to you, and your purchase!

Original review below.

I bought this elsewhere. This is by far the lowest cost True Sinewave inverter I have ever seen. I don't have an Oscilloscope at home to verify the wave form but trust the manufacturers listed specs, which specify True Sinewave.

True Sinewave(close the real thing that comes out of the wall) not "Pure Sinewave", which is just a modified square wave without noise spikes.

I bought this to run my Harman Pellet stove off of battery backup in the event of a power outage without fuel for my portable gas generator. I bought a True Sinewave inverter because I don't want to risk damaging my 3300 dollar stove by using a "Modified Sinewave" inverter, or more accurately a Modified Square wave inverter, which is the cheap standard in electrical power inverters.

Modified Sinewave is the types of inverters in UPS and most inverters sold today. Read the warning that says it could damage variable speed motors and such.

True Sinewave inverters like this one don't have those issues.

I tested this inverter out tonight and it ran my stove perfectly in full auto mode with full auto motor control and full startup sequence with the ignitor. The cooling fan came on for about 10 seconds when my stove was pulling about 350 watts nominal. This unit has 1200 watts of surge power which works for electric motors as startup current( volts times current equals watts) can be quite high.

The Stove draws uses 440 watts of power on auto startup and 255 nominal. As far as startup power for the motors I have no idea.

I can't speak of reliability as I just got it but it has a two year warranty.

Mark :)

Read Best Reviews of Xantrex PROWatt 600 Inverter, Model# 806-1206 Here

We own a pop up camper trailer and we tend to "boon dock" camp a lot. While the 12 volt system on board provided lighting and other needs, we didn't have any 120 volt power and I wasn't up to buying and listening to a generator.

I had a couple of 65 watt photo voltaic panels laying around with a charge controller so it seemed the smart thing to do would be to buy a DC to AC inverter and mount it on the camper. After reading about various inverters I decided the xantrex 600.

Upon receiving the unit I thought it felt and looked well built. USB port, G.F.C.I. duplex recept. I also ordered the remote on/off switch as I needed to mount the inverter outside near the battery box to keep the 12 volt feeder cables short. I went on ebay and found a nice weatherproof Hoffman box, I mounted the inverter in this and attached it under my propane tanks making my cables less than 5 feet long.

I ran the remote switch into the camper to mount on the galley along with two 120 volts at various places. I run two parallel connected AGM batteries that recharge daily from 130 watts of photo voltaic panels.

So far the inverter has worked well. I get 123 volts at my outlets and with the inverter outside in the Hoffman box, I don't hear anything from it. I would recommend this product to anyone.

Want Xantrex PROWatt 600 Inverter, Model# 806-1206 Discount?

I've had lots of inverters in my RV for the last 25 years. And, I can say from experience, you haven't really lived until you get a good quality True SineWave inverter like this one. All the buzzing noises I got from lesser inverters on my TV and laptop are GONE. Plus, this unit is so efficient, I can watch more movies on each deep cycle battery before having to switch over. I have an elaborate $3500.00 12VDC solar system on my RV and this Zantrex PROWatt 600 was the final piece to make it really great. I bought mine on Amazon 2 years ago and just love its performance.

Save 3% Off

Amzer Desktop Cradle with Extra Battery Charging Slot for HTC Shadow - Black

Excellent...it is the only charger I could found that has a cradle, it charges the phone, spare battery and can also sync with the PC through a USB connection..I wish I had another one for my T-Mobile Wing..

Rapid Car Charger with IC Chip for Verizon PCD CDM-8950

I was so glad to find these chargers for a realistic price! We received our purchase quickly and in excellent condition, and they work fine.

It was reasonable in cost and arrived quickly. It even worked. It was much less expensive than Verizon.

Buy Rapid Car Charger with IC Chip for Verizon PCD CDM-8950 Now

I am very pleased to get a charger for my phone at a fraction of the cost it would be at a cell phone store. It arrived within a reasonable amount of time and works great.

Read Best Reviews of Rapid Car Charger with IC Chip for Verizon PCD CDM-8950 Here

HTC Droid Incredible 2 Retractable Car Charger (Free HandHelditems Sketch Universal Stylus Pen)

The charger shouldnt be relied on in emergency situations. It pops out of the car port often, I have to hold it in sometimes. It charges the phone REALLY slow in comparison to other charges. Its a good value for the money.

Save 59% Off

Carmanah GPRV-125 Go Power! 125 Watt Solar Charging Kit

I bought this kit and it came with absolutely everything I needed to install the solar system. It has the 125 watt Carmanah solar module, the 25 amp digital Go Power regulator and all the wire and mounting hardware that I needed to put it on my travel trailer. The instructions for the installation were very simple and this was an easy install, in my opinion. The solar panel has been on for a couple of weeks now and I have to say I wish I had bought one a long time ago. My batteries never seem to be low and I just got back from a 3 day camping trip. I highly recommend this solar kit for anyone who would like to no longer worry about dead batteries in their RV. There is a 25 year warranty on the panel as well. Make sure you get a Go Power solar kit though because they have the best support and they have the better regulator that comes with the solar kit.

This is a video I made on Movie Maker to show aveything that comes in the GPRV-125 kit, incase you are wondering. There is everything you will need to install the solar kit with exception of sealant which you will need if you are installing on an RV roof. I used Dicor sealant on the mounting brackets when I put this on my RV roof. The panel has been on my roof for a year now and it still puts out 7 amps on sunny days and has kept my batteries charged. The charge controller which is called a GP-PWM-25 (in the video) can actually handle 3 of these 125 watt panels but I have not had a need to do so. I have been very happy with this product, it is definitely higher quality then some of the other brands I have seen out there.

Buy Carmanah GPRV-125 Go Power! 125 Watt Solar Charging Kit Now

I was having serious problems keeping my batteries charged while camping. I'd constantly have to run the generator which was annoying. I finally went to the RV store to bite the bullet and get a solar system.

The RV store wanted to sell this exact same unit for about $200 more. I used my iPhone app to scan the barcode and found it here on Amazon. And the best part, being a Prime member, I got 2nd day shipping for $3.99. On a huge solar panel! Amazing.

The panel has worked just as it should so far. It was professionally installed by the RV store. Now I don't have to worry about drained batteries!

Read Best Reviews of Carmanah GPRV-125 Go Power! 125 Watt Solar Charging Kit Here

Belkin F8J071bt04-BLK Belkin 2-Port Car Charger with Lightning to USB Cable 2.1 AMP for iPhone 5, i

The 2.1 AMP chargers give you the charging power of your iPhone wall outlet chargers on the go. Initially, I scoffed at the price for these high AMP chargers and bought a 1 AMP car charger. Since my ride to work in less than 20 minutes, I would probably get 10% more charge off the 1 AMP charger, but with this 2.1 AMP charger, I manage to juice up about 25%. The really cool part of this charger is that I can pull out the USB cable and continue charging my phone via my laptop USB port.

The charger is similar in design to the Griffin PowerJolt Dual Universal USB Car Charger for iPhone, iPod, PDA, Cellphone, MP3 robust construction but bulky, though I am unsure of the need of such a large case (almost 2x) when Scosche has managed the same in a slimmer profile SCOSCHE usbc202m VOLT c2 Dual 10 Watt (2.1A) USB Car Charger Car Charger Retail Packaging Black

The charger has a dull blue bezel which keeps lit when the charger is plugged in. I prefer this for night driving over the single LED. I also like the new low-profile negative (outer) terminal design. No more accidental snagging and ripping the terminal out of the charger. It also helps with a smoother insertion and removal from the power outlet.

The lightning connector is well designed and fits most cases without any issue (check images above)

At current market prices this slightly bulky dual 2.1 AMP USB charger is better value than any other single 2.1 AMP USB charger.

Pros:

* 2 USB Port with 2.1 AMP / 10 Watts per port

* Solid feel to the product. Well built and sturdy parts charger, cable and lightning connector

* Included USB Lightning cable

* Fast charging almost as fast as a wall outlet charger. Approx 2.5 hours for a full charge

* Well designed lightning connector fits most cases without any issue

Cons:

* Pricey at $35 but not too expensive at current market rates for a dual (or single) 2.1 AMP charger with a reliable, detachable Lightning cable

* Bulky design

* The charger has a dull blue bezel that remains on when the charger is connected. It seems inefficient to power the gremlins. I have old USB car chargers that turn-off when a device is not plugged in, light up Red when charging and Green when fully charged I paid less than $10 for those chargers

* For a car, I prefer a coiled cable like this one, just keeps things compact Griffin Tech PowerJolt SE Coiled Lightning Car Charger for iPhone 5, Touch 5G, Nano 7G

Fast, reliable, and specs-wise, it's the best dual charger. Most dual chargers have only one 2.1A port, with the other being a 1A... You want both ports to be 2.1A/10 Watt or 20 Watts total. This one has that, hence the high price. Soon enough they'll all be up to this standard, but for now this is the one to buy. And that lightening cable is a bonus. Cool blue glow around it. What else do you need?

Buy Belkin F8J071bt04-BLK Belkin 2-Port Car Charger with Lightning to USB Cable 2.1 AMP for iPhone 5, i Now

This USB charger is simple and just works.

Nothing fancy, it plugs into the normal cigarette lighter and provides 2 USB ports and a lightning cable. The cable is separate, not built-in to the charger, so you can easily swap it with a second 30-pin cable if you need, although given the price of this unit, it is a bargain if you need both the cable and charger, less so if you do not need the cable.

I was very impressed with the power the unit puts out. It was able to charge an iPad 3 and an iPhone 5 simultaneously, something that is beyond many laptops this alone makes it worthwhile. Definitely recommended, especially if you need the extra cable as well.

Read Best Reviews of Belkin F8J071bt04-BLK Belkin 2-Port Car Charger with Lightning to USB Cable 2.1 AMP for iPhone 5, i Here

Six months ago, when I upgraded to iPhone 5, I bought a car charger on this site. Unfortunately, I didn't read the fine print. It did not include the cable. So, I have been schlepping the cable that came with my phone back and forth between my home and vehicle. It soon grew tiresome! The Belkin charger includes the lightning cable and unlike most car chargers has 2x 10 watt ports so both my husband and I can charge our phones at the same time. Also, my first car charger is white which matches my iPhone. However, I feel more comfortable with a black, a more common charger color. I found myself hiding my charger as it screams " I own the expensive iPhone!" Overall, I am extremely satisfied with the Belkin car charger and would highly recommend it. Finalky, considering that many people spend $30 on a phone case, I don't think the price is unreasonable.

Want Belkin F8J071bt04-BLK Belkin 2-Port Car Charger with Lightning to USB Cable 2.1 AMP for iPhone 5, i Discount?

Upon getting iPhone 5s last Christmas, my wife and I realized we no longer can use our previous iPod/iPhone charger. I knew the new Lightning port was utilized in all forthcoming Apple products, but I kept forgetting all the little accessories I've accumulated over the years which were now useless, unless I bought the adapter.

But I didn't think buying the adapter would be worth the cost, especially the more expensive one as I don't like taking off my iPhone case, and saw that a Belkin car charger by itself for Lightning devices would actually be cheaper.

Go figure.

Belkin products usually have been great to me, and, if I don't get an Apple product, I go with Belkin. So I ordered the car charger, and it works excellently, as presumed. I like the nice blue light it emits (blue is the new black/pink/whatever), and the charging is just as quick as Apple's, if I'm estimating correctly. I like that I can use the charger with any USB device, and there are two ports as well. I can use the Lightning cord for whatever I will, and that leaves me a very happy customer.

Save 16% Off

Hobart 500539 Trek 180 Battery-Powered or 115-Volt Corded Portable MIG Welder

I was on the fence for a while as to if the Trek 180 was really worth the money and would actually serve my needs. I worried that the duty cycle and battery life might make this welder more of a novelty than a useful welder.

My primary reason for considering the Trek was it's off the grid welding capability. My family and friends are in to sand cars and nearly every trip some one breaks some thing and the car is down for the rest of trip. Usually a simple weld job would get the car back in to play and save the trip.

Given the cost of fuel alone to haul a trailer full of toys to the dunes the cost of the Trek 180 is irrelevant! Nothing worse than going for a week long trip and having a break down on the first day.

I considered a corded 110 welder and borrowed a Lincoln 140 to see if I could run if off my Honda 2000i generator (great little geni), but it was not near enough power neither was the 2500 watt inverter in the toyhauler. So a corded 110 welder was out. Plugged in to garage the Lincoln 140 was able to make some decent welds on my buggy frame, but had to cranked up to 95% of it's power to make an acceptable weld.

Well I took the plunge and ordered the Trek 180 any way.

When it arrived I lifted it out of the packaging and it was smaller and lighter than I expected. The out side of the Trek is made like a military style hard polymer ribbed case, very robust, I am surprised Hobart does not mention this in there description.

After charging the Trek for 2 hours per the instructions prior to the first use, I set it up at power level 6 of 10 and welded a 4" piece of exhaust tubing to a 1/4" flange. On battery power only I was able to weld all the way around with out the charge status light changing at all. The weld was better than I expected, very little splatter and very nice bead after knocking the flux off. I did not even have to grind the weld to pretty it up!

This was another concern I had, how well flux core welds would end up looking, would I need to get a tank of gas to make a pretty welds?

Other cheap flux core machines from Harbor some thing made ugly though functionable welds and I was not about to spend this kind of money for those kind of results. As already stated the Trek makes surprisingly nice welds and I am no longer considering purchasing a tank.

Back to welding, I took a couple of scrap pieces of 3/16 thick steal 6" long and welded them from one end to the other. I did this a couple of times and then turned the Trek to full power to see what it would do. Welding over the top of the previous welds I made it about 5" sweeping side to side about 3/4" wide before the low voltage light came on and I had to stop.

I was able to weld the first project and the test pieces all on one charge. No question at all I could repair any of the break downs I have had on a single charge!

The next day I decided to see how well the Trek would do plugged so I used two more scraps of 3/16 by 1" by 6" and started welding set to power level 8 I made several passes taking some breather breaks and found I could weld about three times as long while plugged in only loosely respecting the recommended duty cycle.

On battery the machine performs as advertised, but while plugged in the Trek welds hotter and for at least as long as as any other 110 welder I have used.

The Trek 180 does many things well an is with out question the most powerful 110 welder you can get, while you are not going to be able to open a fabrication shop using this machine, you will be able to most every thing the average DIY guy needs to do. This machine is quality!

I recently bought this welder and I absolutely love it, its portability! I'm a weekend DIY (do-it-yourselfer) guy, and I have been welding for about two years now--so I don't ever get involved with anything more than 1/4" thick metal at the most. Anyway, I really like the option to be "off the grid" and being able to haul this welder anywhere (e.g., camping, four-wheeling, to a friend's house for a quick-fix welding job for them, in a parking lot, etc.). It is extremely well made, durable, and easy to setup. My first fabrication project involved upgrading the wheels (casters) on a Craftsman "creeper" that I have had forever. I wanted casters with brake knobs on them, so when I am laying underneath a vehicle using the creeper I would not roll around when I am wrenching on a tough bolt. The problem was the upgrade 3" casters with brakes that I bought from a local Harbor Freight store could not spin freely; the larger casters were hitting the creeper's frame rail. So I welded tiny, rectangular 16-gauge steel plates to cover over the existing four corner holes for a total of eight weld points (4 plates on each side of the frame), then drilled new holes just to the inside of where the previous holes were so the casters could then spin freely from their new location. The short version is the welder performed flawlessly, with good penetration, a nice even weld puddle, and sharp-looking welds, even at lower voltage using .030 E71T-GS wire. Once you get your settings dialed in for the job at hand, you won't want to stop welding with this machine.

Buy Hobart 500539 Trek 180 Battery-Powered or 115-Volt Corded Portable MIG Welder Now

This is a very well built machine. I purchased this machine to be able to weld off grid for small emergency repairs, It does a fantastic job for that task. I have welded with it just on a 50' ext cord also and it welded great.

I have only used it for flux core use so I cannot comment on its ability to weld with gas.

I would recommend this machine to anybody needing needing to weld off grid for small repairs or can only use 110 v.

Read Best Reviews of Hobart 500539 Trek 180 Battery-Powered or 115-Volt Corded Portable MIG Welder Here

Absolutely outstanding welder. Choose your wire carefully as it seems to perform

much better with .30 wire and smaller. Simply plan on making multiple passes and

you will find that the welds are very good quality. I wouldn't bother setting it

up with gas as it's endurance simply isn't worth the trouble of all the extra baggage.

It really shines as a flux core wire emergency welder which can take on some of the

fieldwork usually reserved for big gas powered welder. Just having it sitting in

my work truck gives me such peace of mind as it can certainly tack together most

equipment problems well enough to finish the day and then properly repair it. Has

saved me many thousands in just the few months I've owned it.

I have found I can get a 1/2" weld about 4-6" long on a single charge. Takes a bunch

of passes and cleaning between them due to the light wire but we're only talking about

15 to 20 minutes of time to put a down machine back to work at least though the end of

the day.

I can't recommend this welder strongly enough.

Want Hobart 500539 Trek 180 Battery-Powered or 115-Volt Corded Portable MIG Welder Discount?

Motorola V3c Razr / Motorola L2 / L7c, L7e / L7i / L71/Blackberry 8800, 7130v, 8707g,A1200 / MING,K

I recently purchase this car charger and was very happy with it performance and the quality of the service that this company gives to it's customers! I had a question about this product and they e-mailed me right back with the answer in an hour! Not to many companies will do that now a days! Or if they did it would be a AUTO REPONSE, they are my favorite! But not this company they e-mailed me right away! I would come back here to buy a product anytime! GREAT SERVICE is the most important thing when buying on the net!

It works fine in the vehicle and connects easily to my phone. It is easy to store in the vehicle.

Buy Motorola V3c Razr / Motorola L2 / L7c, L7e / L7i / L71/Blackberry 8800, 7130v, 8707g,A1200 / MING,K Now

Ikross Black Portable Universal Car Dashboard Mount Holder for Garmin nüvi 1450LMT, 1350LMT, 1490L

• Brand new iKross packaging. Bean bag dashboard mount width: 200mm. Flexible arm length: 190mm. Extended holder dimension: 190mm x 90mm
• Easily attach & secure bean bag mount on dashboard without tools.
• Adjust the flexible arm any way you would like to suit your needs.
• Extra-firm arm absorbs vibration and provide stable viewing platform. Holder has 2 extended arms for wider depth and longer length
• Angle can be adjustable for easy viewing. Suitable for all vehicles dashboard.

I bought it for my TOMTOM GPS in February 2012, at beginning, it's ok, but only after two months, it started to loose, it can not hold my GPS no matter how you ajust it, it totally loose. Don't bother to buy it.

Buy Ikross Black Portable Universal Car Dashboard Mount Holder for Garmin nüvi 1450LMT, 1350LMT, 1490L Now

I was looking for the equivalent to Garmin dashboard mount to be used with my new TomTom 1535 GPS.

Comparison between two will not be in favor to iKross for two reasons: it is bulky (very, very bulky!) and the quality of parts including materials are cheap. It smells like some automobile part just being lubricated with machine oil, but... it works!

It is heavy and stands like a rock on a dashboard. I even managed to keep it on some sort of a pedestal originally designed for GPS in my Honda Accord car. Four "legs" of a thing appeared to be so flexible that I managed to place one of it almost vertically thus saving a room and because of that was able to fit that not that big space.

Overall it is useful but Garmin holder is engineered much better I would have to admit. It takes much less time to install the GPS on it. Here you need to adjust the size of a mount to hold your GPS, slide out bottom holders to prevent your valuable device to fall down and if it is Tomtom you need to think what to do with the sucking cup attached to device. You cannot detach the thing so you need to slightly open it and put behind the iKross holder. While with Garmin you just push the spherical mount of a holder against of a cable connector and GPS will be sitting tight and secure on the mount.

Resume: solid, useful, not expensive, but bulky and not very convenient.

Though if you are Tomtom user this can be your best choice.

Read Best Reviews of Ikross Black Portable Universal Car Dashboard Mount Holder for Garmin nüvi 1450LMT, 1350LMT, 1490L Here

First of all I had high hopes for this. But man it stinks. The holder does not hold GPS properly the foam keeps it from really being seated securely. Also it does not fit the magellan I have it far too small. Tried it with my garmin and that is where the review comes from. The stupid traction stink and after 1 day it no longer would stay in place and kept flying off my dashboard which just pissed me off to no end. Nothing like trying to figure out where to turn and where to go and have the dam GPS go flying off to the other side of the dam van. This is why I have yet to find a single dashboard mount that works worth a dam none of them stay in place unless I glue or use adhesive tape to keep them there. Pointless.

Want Ikross Black Portable Universal Car Dashboard Mount Holder for Garmin nüvi 1450LMT, 1350LMT, 1490L Discount?

It is a good mount. It pretty much does what it is supposed to do, but the clamps that hold the device arent that tight and makes it very easy to fumble it when trying to put it in or take it out. It sometimes slides out if you are trying to push a button on the sly while driving. So 90% of the time it is just fine, but it irks me just enough to say it is ok.

Save 50% Off

EXCELLENT PRODUCT, PRICE, DELIVERY, PACKAGING. I RECOMMEND THIS PRODUCT FOR ALL GPS USERS IN THE CAR.

PRODUCT IS STABLE USEFUL FLEXIBLE, MULTIPURPOSE

SKIL 2354-01 iXO 4-Volt Max Lithium-Ion Palm-Sized Cordless Screwdriver

Let me start by saying that I loved my original Ixo. I still have it and use it. The battery has worn down so low and I needed a second one anyway... so I went ahead and ordered two of these for my shop.

The old version came with a charging cradle that held a selection of 10 various bits. The new version comes in a blister package that is a nightmare to open. It doesn't have a cradle. It just has a wall-wart charger that plugs into the bottom of the tool. It also only comes with 5 bits. Bits are not an issue, as they're cheap enough. The charger is inferior in design, however. Same output power and charge time, but just not as classy as the original.

The old Ixo was made in Maylasia. This one was made in China. They kept the price point the same, but eliminated accessories and moved production to a cheaper plant. Typical business in production these days.

That said, the overall build quality appears the same from the outside. I don't know if it will run for 5 years or so as the old one did. I certainly hope so. I will come back and update my review if I have any issues with this newer model. It certainly doesn't feel like some of the cheap crap we've been seeing these days coming from over there.

Performance of these little drivers is pretty incredible. I've used them to drive wood screws a couple of inches, self tappers into aluminum, etc... I make primary use of it as a string winder for guitars nowadays. (heavy usage)

The slow speed of it makes it very torquey and yet easy to control. The battery lasts for a long time from light usage. It will suffer if you use it for heavy driving, though. The Li-Ion battery in my original one went for a couple years before showing substantial degradation in performance.

I opened up my old one and found the battery to be the very typical 18650 Li-Ion battery which is widely used in small tools and remote control cars, etc... These can be ordered online for less than $10 each and soldered into the Ixo if you are competent enough at that stuff. I will be replacing the battery in my original one and continue to use it in the future.

If these new ones start to degrade, I will swap those batteries as necessary. The motor, gears, electronics, switches, etc... all seem to hold up really well.

Compared to the Ryobi Tek4 mini driver, which I have used extensively, this one is far more compact and delivers the same performance. They use the same battery (although the Tek4's modular batteries are sealed in plastic and not replaceable, and likely similar motors. The Ryobi comes with a clutch, but it makes the tool clunky. The Skil delivers with something that you can actually stick in your back pocket and no frills. The Ryobi looks more like a power tool and this one looks more like a toy. I prefer the tiny size and same power, though.

I recommend this tool to everyone. Even with my complaints as stated, buy it.

Bring back the cradle, Skil (Bosch)!!

UPDATE: Swapping batteries in mine with LG Chem Li-Ion 18650 Cylindrical 3.7V 2800mAh has made these things amazing. The stock battery is 1300mah, so the speed and power feels like double with the upgraded battery. It holds a charge a lot longer, too. (these seem to die too quickly)

I've been in the cstr biz for 25 years and bought more tools than I can recount (thousands). I personally own perhaps 10 different drills, and have handled many dozens more of all styles and makes.

I recall a small drill I bought for my mother 25 years ago one of the first small battery operated drills what a joke could barely turn a screw and battery life was a joke quickly ended up in the garbage (before we learned to recycle batteries).

As such, I stayed clear of these small "personal" screw drivers all these years. But knowing battery advances in the meantime, decided to pick this little guy up on a whim price was reasonable and could always return it.

To my surprise, found this little guy perfect for the odd job around the house, where I wouldn't bother getting out a larger, more powerful cousins and instead use an ubiquitous screw driver that is slow, but gets the job done.

Did a bit of painting recently, and found it very handy to dissemble some large furniture (the led light was actually quite handy) and to take off wall switch plates. Drove 3/4" screws into dense wood with a surprisingly torquey motor using low speed. And the battery life is very good on my second charge after being around the house a month.

For what it is, this little screwdriver does its job quite well. 5/5

Yes, less than ideal charger, but hey, for $35 what do you expect? One thing I'd have preferred is a slot to store bits on the driver, or at least supply several reversible bits (flat/phillips combo etc)

Buy SKIL 2354-01 iXO 4-Volt Max Lithium-Ion Palm-Sized Cordless Screwdriver Now

I was looking only for a handy-dandy little tool which could be stuck in a pocket for those "mobile" repair jobs. This little tool is all that and more. Not only it is handy as can be, its battery life is astonishing. Last week I was able to use it as my sole driver to assemble 4 36" kitchen base cabinets (each requiring roughly 65 screw insertions and tightenings. Power lasted to the last and probably could have gone further but I ran out of cabinets.

The only problem I have is the directional switch is positioned right under where it is most comfortable/practical to put an index finger when using the tool. And it's easy to inadvertently push the switch while exerting drive pressure. Takes a while to get use to that, and even then it's not 100%. A redesign should relocate the switch away from the gripping area. But I can live with that little fault given the overall utility.

Read Best Reviews of SKIL 2354-01 iXO 4-Volt Max Lithium-Ion Palm-Sized Cordless Screwdriver Here

I am giving this as a gift as I currently own one and it works great. However, Amazon is not accurate on the description of "what is in the box" as it says "The SKIL 2354-01 iXO includes one iXO SGK cordless screwdriver, one right-angle attachment, a ten piece bit set, one soft case, and one charger." There, in fact, is no right-angle attachment, a 5-piece bit set, and no soft case.

Want SKIL 2354-01 iXO 4-Volt Max Lithium-Ion Palm-Sized Cordless Screwdriver Discount?

I researched all of these, including the B&D. i ended up going with this one, at lowes, and got it for 30 bucks. and picked up a screwdriver set for 6 bucks. great deal, holds a great charge. good construction. i am very happy. i already used it to assemble a piece of workout equipment, and it didnt falter once

Save 46% Off

Battery Charger Adapter for Samsung Galaxy Nexus i9250 Black

I'm not sure if it's just my model or if it's like this for all models of this phone but the battery doesn't fit snug in the charger so I have to put a shim in it to hold good.

Other then that it works perfect. Very convenient.

Cellular Line Interphone F4 PLUS DUAL Stereo Bluetooth Handsfree Motorcycle Speakerphone Kit (2 Uni

The communicators work great and do all they are supposed to. They are clear, loud, and have lots of distance. Easy to setup and operate also. On the down side, While they are weatherproof, The rubber outer covering does not do well with the sun beating on it while parked, it has a tendency to lift and seperate and gets sticky.. Also, the manual compression mount for the helmet keeps the plug in the communicator rubbing your jacket collar and damages the fit of the plug causing it to flex and get loose and damage the circuit board.. I have replaced both communicators due to this problem within the first year and have since moved them up the helmet with the sticky mount. That seems to have cured the plug problem. Other then these two issues, I'm very happy with them..

This product works very well, I would recommend them for every rider carrying a passenger. No yelling to hear each other, a much safer ride.

Buy Cellular Line Interphone F4 PLUS DUAL Stereo Bluetooth Handsfree Motorcycle Speakerphone Kit (2 Uni Now

Power Bright TK2000 2,000 Watt 220/240 AC Voltage Converter Travel Kit

This is a voltage converter, not a transformer. It works by chopping the 311V peak/220V RMS input to approximately 110V RMS. It's fine for resistive element cooking appliances.

The "Product Description" is for a completely different item. This item does not have a transformer, does not have a power cord, weighs one pound not 26 pounds, and is much smaller than what is listed in the description. It should not be used with anything electronic such as computers or televisions.

Went from US to Europe, bought this mainly for hair dryer (1600 watts) and straightner (1200 watts)...

My straightner burned my hair bcs it overheated to a point i couldn t touch it and melted the outside of it (it was a good and exoensive straightner i had for 2 years, with no problems...)

My hair dryer blew up after used with converter for 15 min... A great quality hair dryer...

Not enough loosing my equipment, as i pulled it out of the wall the european plug fell of, making it impossible to re use it...

Not worth the money, bad quality and it costed me 5 times it s price for my losses.

I d return it it it was whole, and not in the trash somewhere in Europe.

Basically gave it a star because i could not submit the review without a star...

Buy Power Bright TK2000 2,000 Watt 220/240 AC Voltage Converter Travel Kit Now

I bought this to supplement my Kitchen Aid Classic Mixer I bought, for use in Australia.

I researched the types of transformers available, and this one seems adequate for what I wanted, lightweight, compact and has a good power rating of 2000w, which is suitable for my mixer.

It works great! I am now able to use my Kitchen Aid Mixer.

Read Best Reviews of Power Bright TK2000 2,000 Watt 220/240 AC Voltage Converter Travel Kit Here

I purchased this item to use 110v appliances in 220v countries. IT BURNT OUT MY APPLIANCE!!!!!!!!

DONT BUY THIS!!!!

It doesn't convert voltage properly!!!!

Want Power Bright TK2000 2,000 Watt 220/240 AC Voltage Converter Travel Kit Discount?

The voltage output should by checked to confirm correct operation. I did not check, I ended up with a burnt out circuit board on my appliance. I checked after and found 240 volt input and 240 volts output. It did not step down the voltage. Be careful. Amazon was so good about the situation and helped out alot, thanks Amazon.

Save 26% Off