PowerMax XP4400E 4,400 Watt 6.5 HP OHV Gas Powered Generator With Wheel Kit And Electric Start (CARB Compliant)
We live in Southern Louisiana, smack-dab in the middle of hurricane alley, and decided to purchase a backup generator to deal with power outages in the event of an emergency. I wanted sufficient power capacity to run our refrigerator, a small portable AC, a few lights, a small TV, charge our cell-phones, and occasionally charge laptop batteries. We figured that around 3000 continuous watts and 4000 surge watts would be sufficient for our needs.
There are several generators sold by the hardware chains (Lowe's, Home Depot) that fit this description, but they're priced around $600 $700. After some research on the internet, we decided that the PowerMax XP4400 would match our needs, and suit our budget. Just before purchasing it, on an impulse I decided to get the model with the battery powered electric starter, instead of the one that has a rip-cord. Our purchase price (on eBay from MaxTool the same company selling them on Amazon) was $469.99, including a cover for the generator, and shipping.
The generator was shipped Fedex Ground and took about a week to arrive. The external cardboard box showed signs of rough handling during transportation, but the generator was well packed in foam, and not damaged during shipping. The whole box weighs about 130 lbs, and it helped me considerably that the Fedex driver wheeled it right into our garage. Unpacking took about 20 minutes. There are a couple of shipping braces that support the engine during shipment that take a little while to remove.
The first thing I did was to flip the generator upside-down on a mat to install the wheel-kit. There are tools provided with the generator to get the wheels and handles on. As shipped, the tires were sufficiently inflated to bear the weight of the generator.
After flipping the generator right way up again, I filled it with SAE30 oil. We live in a relatively warm climate, so I chose 10W30. If you use generator oil, make sure you chose oil made for a four-stroke engine. The oil-fill tube is awkwardly placed I have a funnel with a tube at the end out it, and found that I had to use it to avoid spilling oil. It takes about 20 oz of oil. To condition the engine, I would suggest changing the oil after 6 hours of run-time, then twice after 8 hours, and every 20 30 hours beyond that.
After filling it with gas (there is a mesh fuel-filter underneath the gas cap, I turned the fuel valve on, and started the generator. The engine turned right away, but wouldn't start. This turned out to be an error on my part it dark, and what I thought was the fully-off position for the choke was instead the fully-on position. After moving the choke to the correct position(fully-off), the engine started up. It is pretty smoky and sputters until the choke is opened. After that it runs very smoothly,with no visible smoke in the exhaust. I don't know what the noise level is, but it is sufficiently low that it doesn't bother me when the generator is running outside the house, and I am on the inside.
The control panel has two 120V outlets (20 Amp), and one 30 Amp outlet that is switchable between 120V and 240V. There is also a 12V outlet to charge a car battery. There is a circuit breaker and a voltmeter. During my initial tests, between 60 watts and 2400 watts of load the voltage stayed at 115 volts, and didn't drop. I haven't tested higher loads yet.
So far, we are quite satisfied. The PowerMax XP4400E is built well, works well, and is less polluting that more expensive Honda, Subaru, and Yamaha powered units sold at the hardware chains.
And a little tip for any small engine that is run infrequently. Make sure you mix the fuel with some anti-oxidant such as Stabil before putting it in the tank. Gas mixed with anti-oxidant should last for about one year.
Six month update (August 2009) the generator still works like a champ. Some of the bolts worked themselves loose through the vibrations, so I've tightened them. No other major problems.
Eighteen month update (September 2010) no problems yet. But I finally got around to installing a transfer switch to connect the generator to the main breaker panel in our house. I recommend this highly it is far better than running cords all over the place, or back-feeding the main panel, which is illegal and very dangerous for linesman working on the utility company's lines. Reliance Controls makes a pre-wired six-circuit transfer switch (31406/30406) that is perfect for this generator and is available from Amazon. Took me about 3 hours to install, 2 of which were spent flush-mounting it in the drywall.
Thirty month update (August 2011) no major problems. I hadn't run the generator for a long time, but with hurricane season here, it was time to change the oil, fill it with gas, and make sure it still worked. The oil looked clean, but had only been used about 8 hours since the last change (a year ago). The electric start wouldn't work (battery was run down), and I flooded the engine. The rip-cord start worked on the second or third pull. I ran the generator for an hour, and will test whether that was sufficient to charge the battery within a week or two. It would have been wiser to unhook the battery while the unit was in extended storage.
Update (November 2011) first problem with generator. One of the tires was flat when I pulled it out today to power the leaf vac for the backyard. I hoped it was just a question of the air leaking out, but the dang thing wouldn't retain air when I filled it. For now, I've sealed the leak with a few squirts of tire sealer/inflator, but I don't know if it will hold. A new tire is anywhere from $20-30, and replacement tube is about $10. The generator engine/windings themselves work fine.
42 month update (August 2012) getting ready for Hurricane Issac. Generator fired up and ran under load perfectly. I hadn't run the generator since November of last year, so I had to pull-start it and was charged within an hour. However, the green slime no longer works to fix the flats in the tires, so I had to get two new tires. Harbor Freight has some inexpensive ($7.99/ea, item 47638, 8" non-marring rubbing tire) inflatable tires that are the same spec as the tires this generator came with (270 lbs maximum weight load at 30 psi), expect they're a relatively bright pink-red. So far after almost 4 years, my maintenance costs have been limited to generator oil and two tires. That's not bad for a generator in this price range.
Overall, I'm very pleased with this generator. It is definitely a good value for the money. The FedEx guy delivered it in good condition. The packaging was excellent. I pulled it out of the box, installed the wheel kit (5-10 minutes), filled it with fuel and oil and it started right up. It is fairly quiet for a generator, but keep in mind quiet is a relative thing. I would say it is definitely quieter than a lawn mower or a typical Briggs&Stratton generator with a lawnmower type muffler (this generator has an automotive type muffler which helps keep the noise down).
It seems to be pretty well built and I expect it to hold up just fine. I bought it as an emergency backup generator and I feel it really is perfect for that use. I think if you are looking for a generator that will get a ton of regular use, you would probably be better off to spend the extra money and get a Honda. But for something that will only see occasional use, this genny really fits the ticket.
I plugged a Killowatt into it to monitor the voltage and load and found that it puts out 120V at 60HZ with no draw. As you start to increase the load, it holds the 60HZ very well right up to the top end of what it can deliver. The voltage starts to drop some as you significantly increase the load, but still manages about 110V or so.
The published numbers are not really too realistic but that is pretty common for small portable generators. It is supposed to handle 3500 watts continuous and 4400 watts surge. In actual testing here is what I found it able to do:
0-2500 watts: it works really well. The voltage and frequency are fine and its seems to be perfectly happy in this range.
2500-3000 watts: frequency holds steady at 60HZ but the voltage starts to drop to 110V. You can tell is is starting to struggle as the load approaches 3000 watts.
3000-3300 watts: you are at the top of its capability here. It does handle it but the voltage drops more and the frequency starts to drop below 60HZ. I would personally operate in this range only for short periods of time.
>3300 watts: it really bogs down significantly and any additional load causes the engine to quit.
So, overall I do highly recommend this generator, especially if you are looking for an emergency backup generator. Just keep in mind that its published wattage numbers are a bit overstated. If you are expecting it to be a Honda, you will be disappointed, but considering what it costs I think it is a very good deal for the money.
Buy DuroMax XP4400E 4,400 Watt 7.0 HP OHV 4-Cycle Gas Powered Portable Generator With Wheel Kit And Ele Now
By Ernie, Retired Journeyman Lineman. The XP4400E is well worth the extra cost over the XP4400, as starter rope must be pulled out at an angle.
This is an excellent generator for the money. The voltage regulation is excellent. Amazing output for it's size along with being very quite for the output that it has. The discription Amazon has for it is great, so many items are not discribed well enough. There is a couple points I want to share with present owners and would be owners.
(1) The voltage selector switch not only changes the voltage monitor 120 to 240 but it's main function is tap changing, this being the reason it must not be switched unless breaker is off (open) or generator shut down. It parallels the two power windings when set for 120 to the 120 sockets and the 120-240 socket. You can draw full capacity fron the 120 sockets or at the 120-240 socket from terminals Bu & R, the W terminal has no voltage so 240 is not available now. (Refer to owners manual wiring diagram page 23 or 24)
Set for 240 the switch series the two power windings and now the 120 sockets have only one power winding applied and so half capacity is available here, 1750 watts from either one but only 875 watts each if both are used. The 120-240 socket now has both windings in series and now has 240 from terminal W to Terminal R and will have two 120 circuits, one from terminal W to terminal Bu and the other 120 circuit from Bu to R. Full capacity is available with the 240 voltage and half capacity from each of the 120 circuits. (Bu is the common terminal to both sockets)
(2)It isn't specified the engine has a steel cyinder sleeve and I don't think it does as I run it for 6 hrs. and changed oil and the oil in the drain pan was pretty well loaded with aluminum and silicon swirling around. I will change again after 12-14 hrs. and then every 20 then on. A filter would have been a boon for engine life, but be diligent and change oil often and it will run a long time.
I think some have gotten generators and done them in early because they didn't change oil in time. Very, Very important because the cyinder is aluminum and no oil filter. More power to all, Ernie Wireman
Read Best Reviews of DuroMax XP4400E 4,400 Watt 7.0 HP OHV 4-Cycle Gas Powered Portable Generator With Wheel Kit And Ele Here
Machine would not produce power.After calling company and recieving instruction to check inside of gen unit to be assured that all wires were connected. After finding one of the legs from the AVR not connected and correcting this, unit has operated top flight, very quiet and handling the load very good We are well pleased with the purchase and hope to experience many years of service
Want DuroMax XP4400E 4,400 Watt 7.0 HP OHV 4-Cycle Gas Powered Portable Generator With Wheel Kit And Ele Discount?
BUYERS BEWARE!!!
I just received this via UPS. The box was damaged and when I opened it, I can see that the arm bracket is bent. I decided not to even take the generator out of the box. As this product is listed as "non-returnable" by Amazon, let's see how the return/exchange process works... I posted a packaging feedback photo to show the condition of the carton upon arrival.
Update: Amazon arranged for pickup and shipped a new one out promptly. Thank you Amazon. However, after assembly and filling with gas, I moved it outside to start it up. I was disappointed to find that the gas tank leaks badly at the gas gauge when the generator is tilted to move it on its wheels. Now that it is filled with gas, let's see what the manufacturer will do for me. Stay tuned...
Maxtool (the manufacturer)shipped the "new" gauge quickly and it arrived today. The one that arrived was rusty and did not include the decal (empty full) but works better than the old one.
FYI, when I removed the old one, it appears that the gauge was damaged in assembly. The plastic part that the screws go thru was cracked by both screws and the glass window was loose. It would appear that to much torque was applied to the screws cracking the plastic part and allowing the glass to be loose and the gas to leak. I will update again when I use it shortly.
Update 2: I used it and it worked well albeit a little noisier than I'd hoped. It did the job though and as such would move the rating up to 2 stars or higher pending more usage/testing.
*******
4/16/2010
After 10 months of usage, note the following:
1) Have had to replace the solenoid for the electric starter twice as it has failed twice. My warranty is up in less than 2 months...you can bet I'll be testing solenoid replacement #2. I wonder if lemon laws apply to generators?
2) Changed the spark plug to find out that the OEM plug & gap does not match either plug listed in the manual. Makes you wonder what plug/gap works best in the generator.
3) After the solenoid failed and waiting for replacement #2, the generator failed to start with pull starter. Checked the air filter to find it was saturated with oil. Removed the head cover to find oil in the head. Note, oil was changed and level was maintained correctly. Cleaned head and will monitor oil leak.
4) An extended warranty would be helpful given the amount of problems we have had during the warranty period. However, an extended warranty is not available.
The one thing I will say in MaxTool's favor is that MaxTool does have a good customer service person and he replies promptly and clearly to inquiries. However, if you are not handy with basic engine skills, stay away from this generator or plan to pay for repairs.
Save 25% Off
